Day 20/365...Or...My Big Fat Greek Barrel

My new online-ordered, specially-designed rain barrel arrived yesterday. I love it. If it wasn't $89 (reasonable though it is), I'd order 5 more.

It's a beautiful terracotta color, sort of like one of those amphora-shaped jugs you see in underwater shipwrecks in the Mediterrean.

The black snap-on lid has quarter size holes, with screen attached to the back, to keep out small animals, bugs, trash, whatever.

The three connector plugs are along the top, for overflow or connector hoses to other rain barrels. They're all silcone-sealed, built-in, and can be capped or used. On one bottom side there's a bottom drain, and about half-way up, there's another connector for a brass spigot that just screws in. The spigot came with the barrel, and even had the teflon tape already wrapped on it.

But my most FAVORITE part is this stamped label. This barrel is recycled. It's first job was bringing olives and peppers from Greece to the U.S. in the hold of some cargo ship.

The barrel waswashed and cleaned, but you can still smell the faint spicy aroma of the olives,and it kinda makes you want to go out for gyros.

The label says HELLAS, and it has a Trojan soldier picking olives, with some Greek-inspired designs around it.

We've got it installed now, in place of the one we had problems with. I figure coming from Greece, it's used to hot sun. And I may get another one to use on the other side of the garage, just so they match.

Nothing like two Greeks in the hot sun. Two Greek barrels. What did you think I meant?

To get your own Greek in the sun:

http://www.easycart.net/FiresideGallery/50_Gallon_Rain_Barrels.html#TC50snapon

Day 19/365 My Water Barrel Obsession, Part 2

My Obsession - Part 2 - Go to previous post to below to read Part 1


So now you have a trashcan on wheels with faucets sticking out of it.


The wheels are useless, except when positioning the barrel. When it's full, no one will be able to move it.


Now, about the Romans.


If you happen to be a homeschooler, this is an excellent chance to do a unit study on the ancient Romans, and their development of water hydraulics. They knew what they were doing, and
you'll be imitating them with your water system.


The key to remember is: water seeks its own level, and will always run to the lowest point.

Place your barrels accordingly.


With multiple barrels, use garden hoses to run between them. Remember, you can buy one hose, and then the female connectors to make shorter lengths to run between the tanks (no need to buy a separate 25' hose for each connection),


If the highest volume collector is at the lowest point, it will just overflow. The water will not back up in the hoses and go into your extra tanks. So, you need to know which end of your garage is lowest, or which side of your house roof has the greatest runoff. Easiest way to do this is just watch the flow during a rainstorm. The ones that gush over should be where your highest tank is place. You can build wooden platforms for it like we did, or you can just buy cinder blocks and stack them under it to lift it higher.


When that tank fills, the water will overflow down into the next lowest tank, and from that one into the next one and so on.


Above is a finished tank. Remember when you tighten the faucet in place to point it in the direction of the incoming or outgoing hose (and leave enough room for your fingers to screw the hose on and off - I've actually had to put quick connectors on a couple of the first tanks we did just because I forgot my fingers have to fit in there).

This tank is at the back corner of our garage. It has an access faucet on the side (also one of our first - put yours up higher - makes filling buckets easier), the middle faucet is the connecting hose to the tank on the front of the garage, and the faucet on the right is the connecting hose to the other tanks on the back end of the garage. It's sitting on a platform of plywood and cinder block.

These are the overflow tanks along the back side of the garage - one hose in, one hose out, plus one access faucet higher on the side.

Closeup of the gutter connection to the lid - just cut a hole the same size as the guttering, and insert the flexible gutter (it comes in colors - here we have white, brown and green).

This is a finished tank - sitting on its little treated wood platform (our driveway is sloped here, so the platform raises the tank, plus gives it a flat surface to sit on, and looks nicer than cinder blocks sitting in front of the house. To the right you can see the previous drain pipe sticking up where all this water use to just run into the street and be wasted.

Another thing we have learned - try to position the barrels in the shade, or at least where they will get no more than half day of sun. This particular barrel gets sun all day from morning to night, and its very hard on the plastic. The barrel gets very hot and flexible (water stays nice and cool - go figure), and we will probably re-position it in the fall, to the side of the garage, in addition to replacing it with a standard water barrel that contains the weight of the water with less stress on the plastic container.

When we start digging the pond out this fall, watch for Part 3 of My Obsession.

Day 19/365 - My Water Barrel Obsession, Part 1

Those of you who know me offline know that I have been obsessed with designing and building our rain water collection system this spring.

This morning I picked up our little small town paper and we are officially in Stage 2 of our Drought. The local water department is predicting mandatory conservation next week (Stage 3) including no car washing, no filling swimming pools, no watering gardens and no lawn watering. Stage 4 will include cutting off water to the houses that use excessive amounts, fining people who use too much, a Water Abuse Hotline, and overtime for local police to ticket those who insist on using water for any of the banned activities.

(Yes, I am feeling a little smug at the moment, and yes, I am whispering "I told you so" under my breath. Okay, maybe sometimes not so whispering, and not so under my breath.)


One of the suggested things the Water Dept offered up was using a rain barrel water collection system. HAH. I assumed they would have further suggestions, including a resource to buy the barrels from, so I asked when I went to drop the water bill off this morning. The lady looked very confused, and asked didn't I have water at my house? And added that maybe I could set a tin tub out in the yard to collect the rain. She was very nice, and very clueless.


I came home and called Lowe's - no rain barrels. Called our local hardware (who historically have everything, much like an old timey Amish hardware store type of place) - no rain barrels.

Called the Virginia State Extension Service (a block away from us) - no rain barrels, because people here "don't go in for that kindof thing". Apparently rain barrels are some sort of communism. I gave the guy a heads up that the local paper was calling for folks to use rain barrels, so he might be getting more phone calls.


On the off chance that someone else needs to know how to build a low-cost rain barrel system-here's what we did, and how, and we made the mistakes to save you money. For those of you that have heard all this before, you can clickout now, skip part 2, and wait till tomorrow for my next post.


These are the first 2 barrels of what is currently 8 barrel system, overall capable of collecting
and holding just under 500 gallons of water. After a 30 minute soft rain, they will be full and overflowing. These two sit on either side of our garage, with direct flexible drains leading into them (one end is connected to the gutter, and the other simply inserted in a cut hole in the lid.)

Ours are black, so they match the rest of the house/garage trim.

Below is the back end of the garage, with another tank on each corner (also connected to the gutters) and two extra storage tanks in the middle, conencted with faucets and hoses. This fall,

these tanks will be connected to underground PVC piping, with a small subpump in one tank. The pump will turn on when the water level is full, and pump the water out to a small 3000 gallon pond we're planning on digging.


The small pond (this will be approx 10 in diameter,and 4 feet deep) will sit on higher ground than my gardens, so that I can run drip irrigation out of it, and turn it on as needed. The pond will also be set up as a wetlands, with waterplants that will filter the water and remove any "acid rain" residue before it hits the plants. The depth means we can add goldfish to it to eat mosquitoe larvae, versus using a tiny bit of oil like we do for the plastic tanks. Global warming being what it is these days, I fully expect to be able to winter over the goldfish in a 4' depth.

Below are the workhorse tanks (there's another 55 gallon on the other side of the fence in back of this one -it's connected with hose, so that both fill during a rain, but I only have to draw out of one -when the level in the first one gets to a certain point, the second tank flows into it). These two tanks collect water off the carport roof, and take care of all the plants in the Swing Garden, plus two fountains, plus the hollyhocks/forsythia beds by the house, plus fresh rainwater for the pups when they're outside. These completely fill and overflow within 10 minutes in a light rainfall, collecting from just one 16' gutter length that pulls from a one-car wide carport roof.

This is the expensive way to make a system: go online and order a rain barrel from any one of a dozen companies. It will cost you upwards of $99 to $250 for a 55 gallon barrel, plus shipping (as of 8-08, shipping is usually in the ball park of $55.00 for each barrel).

****UPDATE: I've just found an online company out of Indiana with excellent prices on recycled food grade 50 gallon barrels - total cost for 1 barrel was $89.95 - price includes snaptop lid with mesh filter, brass spigot, and 3 overflow male connections in top to connect to other barrels, bottom drain plug AND FREE SHIPPING. (Other companies with same price barrels are charging $9.95 for each spigot and connection, many barrels are closed head (meaning you can't get into them to put in spigots yourself), no drain plug, and $55-95.00 for shipping. You can order online, or call them toll free at: 1-877-888-5609. On the net at: http://www.easycart.net/FiresideGallery/50_Gallon_Rain_Barrels.html#TC50snapon

(That was a lot like a commercial, but I'm having to replace our full-sun tank, it just can't handle this Virginia heat, so I have actually purchased one - i should arrive in 5-7 days)

Or you can do this (our entire system is built the following way, with no problems except as regards to the heat mentioned above for one tank):

If all you need is one barrel, maybe to water a small number of plants, or soap off your car on the weekends, buy one Rubbermaid barrel as explained below ($33.00), and a length of flexible guttering at Lowe's ($8), then set your barrel under your downspout. Disconnect the downspout, and connect your flexible guttering. Cut a hole (same size as end of flexible guttering) in the lid and insert the flexible gutting. Voila! You have a basic rain barrel. Once it fills (only takes minutes), remember to occasionally add a teaspoon of cooking oil to the surface to prevent mosquitos.

If you need a larger system, you're going to want to link several barrels together:

Go to Walmart and buy two or more 55 gallon Rubbermaid black square trashcans (the kind with wheels) with lids. Stop at your local hardware store and buy plastic faucets. Note the diameter of the faucet they come in different sizes- 3/4", 1/2". etc -tell the guy you want the size to fit the average garden hose -usually 1/2"), and buy PVC plastic bolts that screw on to the straight connection end of the faucet. Buy a tube of waterproof silicone sealant, and either a sheet of plexiglass, or rubber gaskets that fit your faucet diameter. You'll need a power drill, and a hole cutting drill bit, again, the bit should be the diameter of your faucet.

The idea is to have a barrel that has one faucet connection for a hose to run in, and if you think you will ever want a third barrel, another faucet connection for a hose to the third barrel. If you have multiple barrels, each barrel will have a minimum of two faucets inserted. Think: one hose in, one hose out.

We found it was also convenient to add access faucets, just higher than bucket height, eliminating the need to scoop water out from the top. I've also connected short lengths of hose, and can run that hose down to the fountains to let it slow fill while I do other things.

This is a completed faucet. You can see the silicone under the plexiglass collar - this stabilizes the faucet. There is another collar on the inside, as well as the PVC nut, and all of this holds the faucet steady. We found Lowe's only had brass faucets -DON'T get those - much more expensive, and too heavy for the plastic can.

The first barrel you put together will go slowly. Once you get the hang of it, it takes about 5 minutes to do one.

If you're still with me in my obsession, go to part 2.